# Bill of materials

> **Draft.** This is the parts list for the prototype being built now (October 2026). It is confirmed, with exact hardware
> counts, in the verified release after the prototype has been load-tested. Links are examples checked in October 2026;
> prices and stock change. Nothing here is endorsed by the suppliers.

The [website budget](https://kinetiqgym.com/build#parts) has the same list with dated prices, per-build totals and
editable prices.

**How the list is organized.** The **main list** is what a builder has to buy, in order of importance, from motor and
controller to adhesives. It assumes you make the metal and printed parts yourself (laser cutting or CNC, a drill with taps,
and a 3D printer). The **accessory list** is what many builders already have. The last section gives typical costs for having
the metal made.

**What the builds share.** Every build uses the same bolted 6061 aluminum frame, drum, level-wind, exit and rack side.
The shared parts are sized for the 220 lb peak builds: in the load study every member passes 1.5x at 220 lb, to be
confirmed by load testing. Direct drive only: the motor turns the drum through a clamp coupling,
with no belt or gear between them.

## The five builds

| Build | Peak rope force | Motor | Controller | Power | Size (about) |
|---|---|---|---|---|---|
| **Main** | 158 lb | APS 8072S outrunner, 50 Kv | ODrive Pro | 10S battery (2 x 5S LiPo) | 400 x 227 x 103 mm |
| **Lite** | 158 lb | APS 8072S, wound to about 25 Kv | ODrive S1 | 36 V wall supply inside | 400 x 227 x 103 mm |
| **MP80100** | 158 lb | MP80100 outrunner, 50 Kv | ODrive Pro | 10S battery | 444 x 227 x 103 mm |
| **MP80100 wye** | 220 lb peak | MP80100 rewired wye, about 29 Kv | ODrive Pro | 10S battery | 444 x 227 x 103 mm |
| **C80100** | 220 lb peak | APS C80100, wound to about 25 Kv | ODrive Pro | 10S battery | 429 x 227 x 103 mm |

- **Main:** the reference build. A light rotor (about 2.5 kg felt at the rope before compensation), about 13 N·m.
- **Lite:** the low-cost build on the main build's frame, mount and motor body, plugged into the wall. A Mean Well 36 V,
  600 W supply inside, an ODrive S1 with two brake resistors on the base plate, and a phone app (Bluetooth) and a knob in
  place of the battery, the Raspberry Pi and the touchscreen. At about 25 Kv, 158 lb takes 37-45 A.
- **MP80100:** the same frame with a 44 mm longer motor bay. About 4 kg felt at the rope; ships from China.
- **MP80100 wye:** if the 50 Kv motor is wound delta, re-terminating it in wye gives about 29 Kv, so 220 lb takes about
  60 A (the ODrive Pro gives 70 A continuous). Ask the seller how it is wound before buying for 220 lb.
- **C80100:** wound to order at about 25 Kv, so 220 lb takes about 52-63 A on the ODrive Pro. The motor is 15 mm shorter
  than the MP80100.

**Motor mounting parts by build:**

| Builds | Coupling | Spacers and screws | Before fitting |
|---|---|---|---|
| Main, Lite | McMaster-Carr 2469K23 (10 mm motor, 12 mm drum) | 4 x M5 spacers 10 x 3 mm, 4 x M5 x 14 (Ø59 mm circle) | - |
| MP80100, MP80100 wye, C80100 | Ruland MCLX-12-12-F (12 mm motor, 12 mm drum) | 4 x M5 spacers Ø10 x 10 mm, 4 x M5 x 25 (Ø56 mm circle) | cut the bell-end shaft to a 10 mm stub |

In the tables below, **Battery builds** means Main, MP80100, MP80100 wye and C80100.

## Main list

### Motor and controller

| Qty | Part | Builds | Notes |
|---|---|---|---|
| 1 | APS 8072S outrunner, 50 Kv | Main | Alien Power Systems (UK). Sensored, 10 mm keyed shaft. |
| 1 | [MP80100 outrunner, 50 Kv, sensored](https://www.aliexpress.us/item/3256805081566856.html) | MP80100, MP80100 wye | Ships from China (3-4 weeks). For 220 lb, ask the seller whether it is wound delta. |
| 1 | [APS C80100 outrunner, sensored, custom ~25 Kv](https://alienpowersystem.com) | C80100 | Alien Power Systems (UK): ask for the ~25 Kv winding and its price. Ø80 x 92 mm, 4 x M5 on Ø56, 12 mm keyed shaft. |
| 1 | APS 8072S outrunner, custom ~25 Kv | Lite | Wound to order. Same body, mount and 10 mm keyed shaft as the main build's motor. |
| 1 | [ODrive Pro](https://shop.odriverobotics.com/products/odrive-pro) | Battery builds | Controller only; the heat spreader is separate. 70 A continuous. |
| 1 | [ODrive S1, solder-pad version](https://shop.odriverobotics.com/products/odrive-s1) | Lite | 40 A continuous on its heat spreader, 80 A peak, 12-50.5 V, on-board magnetic encoder. Screws to a 6061 plate you make; the ODrive bracket stays. |
| 1 | [ODrive Pro heat spreader](https://shop.odriverobotics.com/) | Battery builds | |

### Battery and power

| Qty | Part | Builds | Notes |
|---|---|---|---|
| 2 | [Thunder Power TP2700-5SR70](https://www.thunderpowerrc.com/products/tp2700-5sr70) | Battery builds | 5S 2.7 Ah LiPo, EC5 leads. Two in series on the printed spacer. For more charge the bay also takes 2 x TP3300-5SR70 (122 Wh a pair against 100 Wh, regen up to 39.6 A; no spacer). Built to order in the US. |
| 1 | [Mean Well LOP-600-36 power supply](https://www.jameco.com/z/LOP-600-36-MEAN-WELL-600W-Low-Profile-Energy-Efficient-Medical-Open-Frame-Power-Supply-36V-11-1A-Convection-16-7A-with-Fan_2410207.html) | Lite | 36 V open frame: 400 W by convection, 600 W with airflow, 150 % for 3 s. About a 3-week lead time. |
| 1 | [JBD 10-17S 80 A smart BMS, same port, Bluetooth](https://www.ebay.com/itm/398016908803) | Battery builds | US-stocked. Same port, so regen charges through it; NTC probe. The bay is sized for its 102 x 65 x 12 mm board. Set over-charge to 4.20-4.25 V per cell. |
| 1 | [Blue Sea 5191 MRBF terminal fuse block](https://www.amazon.com/dp/B0019ZBTV4) | Battery builds | 58 V DC; stands on a printed insulating pad. |
| 2 | [Blue Sea 5176 MRBF 40 A fuse](https://www.amazon.com/dp/B0016HTXAY) | Battery builds | 58 V DC; one spare. |
| 1 | [50 W 1 Ω aluminum-housed resistors, 5-pack](https://www.amazon.com/dp/B0F43QWVM3) | Lite | Two in series (2 Ω) as the S1's brake resistor, screwed flat to the base plate, which is their heatsink. |
| 2 | [MINI 58 V 10 A fuse (Littelfuse 0997010.WXN)](https://www.digikey.com/en/products/result?keywords=0997010.WXN) | Battery builds | The charge-port line; one spare. |
| 2 | [MINI 58 V 3 A fuse (Littelfuse 0997003.WXN)](https://www.digikey.com/en/products/result?keywords=0997003.WXN) | All | The 5 V regulator feed; one spare. Ordinary MINI blades are 32 V. |
| 2 | [Inline MINI fuse holder, 58 V DC (Littelfuse 0FHM0003ZXJS)](https://www.digikey.com/en/products/detail/littelfuse-commercial-vehicle-products/0FHM0003ZXJS/29571868) | All | 20 A, 18 AWG leads, rated 58 V DC (most inline holders are 32 V). |
| 1 | [C14 panel-mount inlet, 10 A, 2-pack](https://www.amazon.com/dp/B07PVP7GL2) | Lite | The mains inlet, snapped into the back step. |
| 1 | [KCD1 rocker switch, 10 A 125 V / 6 A 250 V](https://www.amazon.com/dp/B0DX1JY5BW) | Lite | Mains on/off in the line lead, beside the inlet. |

### Drum and rope

| Qty | Part | Builds | Notes |
|---|---|---|---|
| 1 | [McMaster-Carr 2469K23 clamp coupling](https://www.mcmaster.com/2469K23/) | Main, Lite | One-piece steel, 10 mm motor / 12 mm drum, 29 mm OD x 45 mm, 104 N·m. The drum needs up to 17.1 N·m (25.7 with the 1.5x margin). |
| 1 | [Ruland MCLX-12-12-F clamp coupling](https://www.ruland.com/mclx-12-12-f.html) | MP80100, MP80100 wye, C80100 | One-piece steel, 12 mm motor / 12 mm drum, 105 N·m. |
| 1 | 12 mm steel drum shaft, 200 mm | All | Round (a 12 mm linear shaft), used uncut. |
| 1 | [6001-2RS bearings, 2-pack](https://www.amazon.com/dp/B07GVN7GQ7) | All | The drum shaft, in the two machined holders. |
| 2 | [goBILDA 1301-0016-0012 clamping hub, 12 mm round bore](https://www.servocity.com) | All | The drum hub and the 81T gear hub. |
| 1 | 1/8 in UHMWPE rope | All | About 3 m. |

### Level-wind and exit

| Qty | Part | Builds | Notes |
|---|---|---|---|
| 1 | [MGN15H rail 200 mm with block, 2 sets](https://www.amazon.com/dp/B0D7CLND4B) | All | The traveller rail (one spare set). |
| 1 | [Tr8 x 2 lead screw, 200 mm, 2-pack](https://www.amazon.com/dp/B0B8RKSDJV) | All | With brass flange nuts; used uncut. Pick "200mm / 2pcs Tr8X2". |
| 1 | [goBILDA 1309-0016-0008 Sonic Hub, 8 mm bore](https://www.gobilda.com/1309-series-sonic-hub-8mm-bore/) | All | The 45T screw gear's hub. Not the 8 mm REX version. |
| 1 | [626ZZ bearings, 10-pack](https://www.amazon.com/dp/B07JHKBG4X) | All | The travelling and fixed rollers; 8 used. |
| 1 | [688ZZ bearings, 5-pack](https://www.amazon.com/dp/B08199J4RJ) | All | The lead screw's far end, in the printed stand. |
| 1 | [MR128ZZ bearings, 10-pack](https://www.amazon.com/dp/B089GG2YCT) | All | The lead screw's fixed end, in the tower wall. |
| 1 | [F8-16M thrust bearings, 4-pack](https://www.amazon.com/dp/B07QLTXJDH) | All | The lead screw's fixed end, both directions. |
| 1 | [8 mm set-screw shaft collars, 10-pack](https://www.amazon.com/dp/B08SK2LNNV) | All | Preloads the thrust pair. |
| 1 | [ISO 7379 shoulder bolts 6 x 16, M5, 6-pack](https://www.amazon.com/dp/B0DP6ZRSTT) | All | The four roller axles. |
| 1 | [16008-2RS bearings 40 x 68 x 9, 2-pack](https://www.amazon.com/dp/B0CMXGZMG8) | All | The exit swivel pair. |
| 1 | [F6001-2RS flanged bearings, 4-pack](https://www.amazon.com/dp/B09BVV9BYZ) | All | The exit pulleys: the rope runs on the outer ring. |
| 1 | [ISO 7379 shoulder bolts 12 x 25, M10, 2-pack](https://www.amazon.com/dp/B077GX5R3H) | All | The exit pulley axles. |
| 1 | [M12 flat washers, DIN 125A 13 x 24 x 2.5, 25 pcs](https://www.amazon.com/dp/B0FQHCTQ5N) | All | Two on each exit axle shoulder, so the nut still clamps the pulleys. 2.5 mm thick: thinner ones leave the shoulder proud. |
| 1 | [Dowel pins 5 x 60 mm, 304 stainless, 24-pack](https://www.amazon.com/dp/B0FZHR1NP3) | All | The exit's side rails. |

### Controls and screen

| Qty | Part | Builds | Notes |
|---|---|---|---|
| 1 | [Teensy 4.0](https://www.pjrc.com/store/teensy40.html) | Battery builds | Machine control. |
| 1 | [Waveshare SN65HVD230 CAN board](https://www.amazon.com/dp/B00KM6XMXO) | All | 3.3 V CAN transceiver. |
| 1 | [Pololu D42V55F5 regulator (#5571)](https://www.pololu.com/product/5571) | All | 5 V output, 60 V maximum input. Not the D36V50F5: it is rated to 38 V and a full pack is 42 V. |
| 1 | [Seeed XIAO ESP32-C3](https://www.amazon.com/dp/B0B94JZ2YF) | Lite | Bluetooth link to the phone app and the knob; talks to the S1 over CAN through the CAN board. |
| 1 | [EC11 rotary encoders with push button and knob caps, 5-pack](https://www.amazon.com/dp/B08728K3YB) | Lite | The resistance knob, through the left cover. |
| 1 | [Raspberry Pi 4 Model B](https://www.raspberrypi.com/products/raspberry-pi-4-model-b/) | Battery builds | The budget assumes 2 GB. |
| 1 | [Waveshare 4 inch HDMI LCD (C)](https://www.amazon.com/dp/B09QKR364V) | Battery builds | 720 x 720 square capacitive touch display: HDMI video, USB-C touch. |
| 1 | [Flat HDMI cable kit, HDMI to 90-degree micro-HDMI, 10 cm](https://www.amazon.com/dp/B0HGXD92P2) | Battery builds | Screen to the Pi's HDMI 0. You assemble it. |
| 1 | [Right-angle USB-C cable, 1 ft, 2-pack](https://www.amazon.com/dp/B0FG7Z6QLX) | Battery builds | The screen's touch and power, to a Pi USB port. |
| 1 | [90-degree USB-A adapters, 4-pack](https://www.amazon.com/dp/B0C7V37X25) | Battery builds | The right angle at the Pi's USB port. |
| 1 | [Noctua NF-A4x10 5V fan](https://www.amazon.com/dp/B00NEMGCIA) | All | Cools the ODrive. |
| 1 | [Right-angle micro-USB cable, pack](https://www.amazon.com/dp/B08BZD66H4) | Battery builds | Teensy to Pi. |

### Connectors and charging

| Qty | Part | Builds | Notes |
|---|---|---|---|
| 1 | [42 V 2 A charger (10S)](https://www.amazon.com/dp/B08JYSZX78) | Battery builds | Fit an XT60 male plug (about 1.5 h per charge). |
| 1 | [Amass XT60E-F, 10-pack](https://www.amazon.com/dp/B09SL2MNN1) | Battery builds | The panel charge socket; one used. |
| 1 | [EC5 connectors, 10 pairs](https://www.amazon.com/dp/B08GPR7SVR) | Battery builds | Pack and BMS connections. |
| 1 | [5S JST-XH balance leads, 10-pack](https://www.amazon.com/dp/B073ZGF8D9) | Battery builds | Pack-to-BMS balance leads. |
| 1 | [WAGO 221-615, 15-pack](https://www.amazon.com/dp/B07CJR8MH4) | Battery builds | Five-port lever nut for 10 AWG, the switched negative junction; one used. |
| 1 | [APIELE 12 mm latching switch, 2-pack](https://www.amazon.com/dp/B083QMF2J1) | Battery builds | The power button: a signal to the BMS soft-switch input. |

### Adhesives and spacers

| Qty | Part | Builds | Notes |
|---|---|---|---|
| 1 | [Loctite 638 retaining compound, 50 mL](https://www.amazon.com/dp/B000O01EV0) | All | Bonds the drum hub and the drum flanges to the round shaft. |
| 1 | [Loctite 641 bearing retainer](https://www.amazon.com/dp/B01MQJ92VM) | All | Holds the drum bearings' inner rings on the shaft (the rope load turns with the shaft, so a loose ring creeps) and the bearings in their seats (drum holders, MR128ZZ, 688ZZ). Medium strength: heat to take apart. |
| 1 | [M5 aluminum spacers 10 x 3 mm, 20-pack](https://www.amazon.com/dp/B0CQ2R5GDW) | All | The 3 mm spacers under the APS 8072S face. |

### Small parts for the latch, rack side and encoder

| Qty | Part | Used for |
|---|---|---|
| 4 | Shoulder screw ISO 7379, 12 x 12 mm, M10 x 16 thread, 12.9 steel | the rack side's four studs |
| 4 | Shim washer 12 x 18 x 2 mm (DIN 988) | under each stud head |
| 2 | Dowel pin 4 x 16 mm, hardened (ISO 8734) | latch slider guides |
| 1 | Dowel pin 8 x 16 mm, hardened (ISO 8734) | latch anvil |
| 2 | Dowel pin 3 x 18 mm, hardened (ISO 8734) | trigger-link guides |
| 1 | Compression spring 0.35 mm wire x 3 mm OD x 45 mm, stainless | latch return; to be chosen and tested on the prototype |
| 1 | Stainless rod 1.2 mm, cut to 39.4 mm | the spring's guide rod |
| 2 | Round spacer M2.5 x 3 mm, 5 mm OD, aluminum | between the trigger link and the slider |
| 3 + 6 | M5 countersunk screws, 18 mm and 22 mm, with 9 M5 nyloc nuts and 9 washers | the three corner brackets |
| 6 | M4 x 18 countersunk screws | the rear plate to the base plate |
| 4 | M4 x 12 countersunk screws | the motor face plate brackets |
| 2 | M3 x 18 countersunk screws | the rear plate into the motor face plate's back edge |
| 8 | M3 x 12 countersunk screws | the drum flanges to the tube |
| 6 | M4 x 25 countersunk screws | the mating plate into the rack cheeks |
| 4 | M2 x 5 countersunk screws | the service lid |
| 1 | Diametric magnet 6 x 5 mm (N45SH) | the encoder, glued into the drum shaft end |

### Aluminum frame stock (cut it yourself)

| Qty | Part | Builds | Notes |
|---|---|---|---|
| 1 | 6061-T6 aluminum plate and drum tube, to cut yourself | All | 0.250, 0.375 and 0.750 in plate and the 1-1/4 in drum tube from a local metal shop, enough for one build. You cut and drill it (CNC router or laser, a drill and taps, the printed drill guides). No CNC: have the metal made instead (below). About $180. |

## Accessory list: check your parts bin first

Not in the main list's total. Buy only what is missing.

| Qty | Item | Builds | Notes |
|---|---|---|---|
| 1 | Taps and drills for the edge holes | All | M3 and M4 taps with a tap handle, and 2.5 and 3.3 mm drills: the edge holes are drilled by hand through the printed guides. |
| 1 | [USB isolator](https://shop.odriverobotics.com/) | All | Protects the PC when you set up the ODrive over USB. |
| 1 | [Super Lube synthetic grease, 3 oz](https://www.amazon.com/dp/B000XBH9HI) | All | The lead screw and the gears. |
| 1 | Silicone wire, mixed gauges | All | 10 to 24 AWG; lengths in [wiring.md](https://kinetiqgym.com/docs/wiring.html). |
| 1 | [Ring terminals, pack](https://www.amazon.com/dp/B0DM8FW4LV) | Battery builds | 10 AWG M5 (pack +), 16 AWG M5 (charge +), 10 AWG 5/16 in (ODrive DC+), 18 AWG 5/16 in (regulator feed). |
| 1 | Ferrules and heat-shrink | All | |
| 1 | IEC C13 mains cord | Lite | Any standard computer or monitor power cord. |
| 1 | 6.3 mm insulated female quick-disconnects | Lite | For the inlet and rocker switch tabs. |
| 1 | Power supply mating connectors (CN1, CN2) | Lite | The AC input and 12 V auxiliary housings with crimps, as listed in the LOP-600 datasheet. |
| 1 | Ring terminals, M3.5 and M4, 10-16 AWG | Lite | The supply's DC screws, its earth screw and the earth stud in the base plate. |
| 1 | Thermal pad, 0.5 mm, 6 W/mK | Lite | Between the S1 and its plate. |
| 1 | JST GH 4-pin cable | Lite | CAN from the CAN board to the S1. |
| 1 | [Low-profile female header strips](https://www.amazon.com/dp/B0948H7FPP) | All | The Teensy socket: 2 x 14-pin low-profile machined-pin female. |
| 1 | [Prototype perfboards, pack](https://www.amazon.com/dp/B072Z7Y19F) | All | Three small boards (controller, CAN, regulator). |
| 1 | MicroSD card | Battery builds | For the Raspberry Pi. |
| 2 | [PAHT-CF filament, 1 kg spool](https://www.amazon.com/dp/B0F37YW223) | All | The end pieces, level-wind, exit, tower, gears and brackets. |
| 1 | PETG-CF filament, 1 kg spool | All | The covers. |
| 1 | [1 mm EVA foam roll](https://www.amazon.com/dp/B0BXJHVH5M) | Battery builds | Battery pads; or print them in TPU 95A. |
| 1 | [2 mm EVA foam sheet](https://www.amazon.com/dp/B08YXYN327) | Battery builds | Battery pads; or print them in TPU 95A. |
| 1 | Cable ties and thread locker (Loctite 243) | All | |
| 1 | [1 in steel hitch pin](https://www.amazon.com/dp/B08974F734) | All | Or your rack's own 1 in pin: at least 92 mm between the head and the clip hole. |
| 1 | [3DZWMAN heat-set insert kit, 380 pcs (M2 to M8, with tips)](https://www.amazon.com/dp/B0D2R955CL) | All | The insert pockets in every printed part are cut for this kit: M2 3 x 3.2, M2.5 4 x 4.0, M3 4 x 4.2, M4 5 x 5.0, M5 5 x 7.0 mm (length x outer diameter). Other brands may not grip. |
| 1 | [Metric socket screw assortment](https://www.amazon.com/dp/B0FJFVG31G) | All | |
| 1 | [M4 button-head assortment](https://www.amazon.com/dp/B0BJQ4M7D5) | All | |
| 1 | [M3 flat-head assortment](https://www.amazon.com/dp/B0GS8FZLTK) | All | |
| 1 | [M3 x 25 flat-head screws, pack](https://www.amazon.com/dp/B0H5JVF4K4) | All | |
| 1 | [M4 x 10 flat-head screws, pack](https://www.amazon.com/dp/B0956VQVJ2) | All | |
| 1 | [M4 flat-head assortment](https://www.amazon.com/dp/B0CW5Y4RQY) | All | |
| 1 | [M2.5 x 5 flat-head screws, pack](https://www.amazon.com/dp/B0CG1NVX6J) | All | |
| 1 | [M2.5 socket screw assortment](https://www.amazon.com/dp/B0FG2BYJSR) | All | |
| 1 | [M2.5 x 5 socket screws, pack](https://www.amazon.com/dp/B0GM84W3X8) | All | |
| 1 | M3 x 40 countersunk screws, pack | All | The exit clamp, 4 needed. |
| 1 | M3 x 10 low-head socket screws (DIN 7984), pack | All | The lead screw nut's flange, 4 needed. |
| 1 | M10 nyloc nuts and washers | All | The exit pulley axles, 2 of each. |
| 1 | [Lock-nut and washer assortment](https://www.amazon.com/dp/B0F1FGKC1C) | All | |
| 1 | [Plain hex-nut assortment](https://www.amazon.com/dp/B097N3SGCD) | All | |

The exact screw sizes and counts come with the verified build files.

## No CNC? Have the metal made

Typical costs for having the metal parts made for one machine: about $290-505 in all. Prices depend on the shop, the
quantity and the lead time, so get quotes. This replaces the aluminum line in the main list. Ready-made metal kits are planned after testing.

| Item | Typical cost (USD) | Notes |
|---|---|---|
| [Laser-cut plate set, 6061-T6](https://sendcutsend.com) | 200-300 | The base, rear and motor face plates, the rack cheeks and the drum flanges, plus the four 2 mm steel bearing cheeks, from an instant-priced laser service. The prototype's plates came to about $200-300 at SendCutSend (October 2026). Tapping and countersinking are extra, charged per hole. |
| Thick plate parts: drum holders, corner gussets and the mating plate | 75-175 | The two 3/8 in drum bearing holders, the three 1/4 in corner gussets and the 3/4 in mating plate, cut from plate like the rest (no machined blocks). The 28 mm bearing bores are finished to H7 and the M10 threads tapped after cutting. |
| Drum tube, 6061, 1-1/4 in OD x 0.250 in wall, 100 mm | 15-30 | From a local metal shop, cut square; ask for T6. |

The holes in the plate edges and the tube ends are drilled and tapped by hand through the printed drill guides.

## Printed parts

Printed for every build (materials and settings in [printing.md](https://kinetiqgym.com/docs/printing.html)):

- **PAHT-CF:** the 81T drum gear, the 45T screw gear, the traveller frame, the fixed roller bracket, the top tie, the
  far-end screw stand, the screw-end tower, the rope clamp ring, the exit bearing housing, the exit carrier, its retainers
  and rail caps.
- **PA-CF:** the motor-end and battery-end pieces, the ODrive bracket, the latch finger bar and the service lid.
- **PETG-CF:** the two covers (end caps printed in) and the rear I/O panel.
- **PETG:** the screen frame, the front board plate and its standoffs, the WAGO bracket, the fan duct, and the TP2700
  battery spacer (only with the TP2700 pair).
- **TPU 95A or EVA foam:** the three battery pads.
- **PETG or PLA:** the five drill guides for the edge holes (tools, not parts of the machine).

The Lite adds a printed tray for its power supply and leaves out the battery parts, the screen frame and the rear I/O
panel.